High-Precision Extrusion System: Utilizes a conical twin-screw extruder, with a stable screw speed of 10-50 rpm, improving plasticization uniformity by 20%. The screw-barrel clearance is controlled within 0.1-0.3 mm, ensuring a pipe diameter error of <=±0.2 mm, meeting the stringent dimensional accuracy requirements of food-grade packaging.
Intelligent Control System: Integrates PLC and touchscreen control, supporting real-time monitoring of parameters such as temperature, pressure, and speed. Through PID closed-loop regulation, temperature fluctuations are controlled within ±1℃, reducing energy consumption by 15% compared to traditional equipment. An automatic screen changer reduces downtime for screen replacements, improving production continuity by 40%.
Modulární konstrukce matrice: Využívá modulární konstrukci matrice, která umožňuje rychlé přepínání mezi průměry trubek Φ10–Φ150 mm, čímž se zkracuje doba výměny na 15 minut. Hladký přechod průtočného kanálu závitořezné hlavy a absence mrtvých rohů snižují riziko rozkladu materiálu, což má za následek lesk povrchu trubky přes 95 %.
Vysoce účinný systém chlazení a tvarování-
Equipped with a water-ring cooling system and a vacuum shaping chamber, the cooling efficiency is 3 times higher than traditional water tanks. The water temperature inside the shaping chamber is automatically controlled at 20-25℃, the pipe wall thickness uniformity reaches ±3%, and the product tensile strength is >=18MPa.
Environmentally Friendly and Energy-Saving Features
The entire machine uses a variable frequency energy-saving motor, reducing standby power by 60%. The waste gas recovery system reduces VOC emissions, meeting the GB 16297-2022 environmental standard. The die head waste heat recovery device saves approximately 5000kWh of electricity annually.
